Tap Fitting and Repairs in London

Silver Saints London handymen repair or fit bathroom and kitchen taps.

4.9 stars from over 1,000 reviews | By time, no call-out fee | Fully Supported Service | Same or next day available | Mon to Sat 8am to 5pm | Book Online 24/7

Call 0207 0999 199 Book Online Now

Specific arrival times. A one-hour arrival window is confirmed on every booking.

How much does it cost to fit or repair a tap in London?

Tap fitting and repairs from Silver Saints are charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT for each additional 30 minutes, with no call-out fee, and Saturday is charged at the same weekday rate. Most tap jobs are completed inside the first 30 to 60 minutes where the isolation valves work and the fittings are not seized, so a typical tap repair or swap costs between £60 and £90 plus VAT plus the part. The handyman assesses the tap and the access first and gives a clear estimate before starting, so there is no open-ended bill, and where a tap is too worn or corroded to repair economically the advice is to replace it rather than keep paying to patch it.

Ready to book?

Call 0207 0999 199 Book Online Now

Why Silver Saints

Here is why London customers have booked Silver Saints for tap fitting and repairs.

• 4.9 stars from over 1,000 Google reviews
• 5 stars on Trustpilot and Checkatrade
• £5 million public liability insurance
• Operating since May 2008
• All work guaranteed against faulty workmanship, with a 12-month guarantee on labour and parts
• A specific one-hour arrival window on every booking

Ready to book? We can come today or tomorrow.

Call 0207 0999 199 Book Online Now

Why your tap drips, and what we actually fix

A dripping or faulty tap has a specific cause that depends on the type of tap, and diagnosing it correctly is what stops it dripping again a week later. An older compression or pillar tap, common in Victorian and Edwardian bathrooms, drips because the rubber washer has perished, which is a quick fix, but if it keeps dripping after a new washer the brass valve seat underneath has been scored by years of hard water and needs re-cutting or the tap needs replacing, not just another washer. A modern mixer or monobloc tap does not use a washer at all: it uses a ceramic disc cartridge, and a drip means the cartridge is worn or limescaled and needs matching to the brand and replacing. A drip from the spout rather than around the base is usually a perished O-ring or a scaled cartridge. London's hard water is the common thread, furring up cartridges and ceramic discs across the capital, which is why so many tap faults here are cartridge rather than washer faults.

Taps across different London properties

What is behind the tap matters as much as the tap itself, and that varies by London property. Victorian and Edwardian houses often still have the original pipework and no isolation valves, so a simple tap swap can mean draining down or fitting isolation valves first, and seized compression fittings on old pipe are the main thing that turns a quick job into an hour. Mansion-block flats frequently have boxed-in pipework under deep basins where access is tight. Modern new-build flats usually have isolation valves and push-fit pipework, so a mixer or monobloc swap is fast. Knowing what to expect under the sink by property type is why most London tap jobs are a single visit, and why the estimate is given after the handyman has looked at the access, not before.

The expert difference on a tap job

The judgement that separates a proper tap repair from a temporary one is in the detail: identifying whether the tap is a compression or a ceramic-disc type before touching it, matching a cartridge to the exact brand and model rather than forcing a generic one, checking and replacing the flexi tails and isolation valves while access is open so the next leak is avoided, and being straight when a scored seat or a corroded body means a new tap is better value than repeated repairs. The team supplies and fits a customer-supplied tap, or can advise on a suitable replacement, and tests for leaks under pressure before leaving.

Combine your tap job with other plumbing in one visit

Because every Silver Saints handyman is multi-trade, a tap fitting or repair can be combined with other work in the same visit with no second call-out fee. Customers commonly pair a tap job with clearing a slow or blocked waste, fitting isolation valves, resealing the sink or worktop, or sorting a dripping shower or a running toilet at the same time, all under one appointment rather than waiting on separate trades.

Frequently asked questions about tap fitting and repairs in London

Can you fit or repair a tap today in London?

Silver Saints offers same-day and next-day tap appointments across London subject to availability, so call 0207 0999 199 for an urgent dripping or leaking tap or book online at bookings.silversaints.com and the team will confirm the earliest slot for your postcode.

How much does it cost to fit or repair a tap in London?

Tap fitting and repairs from Silver Saints are charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT for each additional 30 minutes with no call-out fee, so a typical tap job done within the hour costs between £60 and £90 plus VAT plus any part.

Why does my tap keep dripping even after a new washer?

A tap that keeps dripping after a new washer usually has a scored brass valve seat worn by years of hard water, so a Silver Saints handyman re-cuts the seat or advises replacing the tap rather than fitting another washer that will fail again.

Do you repair mixer and monobloc taps as well as traditional taps?

Silver Saints repairs traditional compression and pillar taps as well as modern mixer and monobloc taps, replacing the rubber washer on older taps and the matched ceramic disc cartridge on modern ones.

Do I need to supply the new tap or do you provide it?

For a tap replacement Silver Saints asks the customer to have the new tap on site and accessible, and the handyman can advise on a suitable tap if needed and fit a customer-supplied tap on the visit.

Can you fix a stiff tap that is hard to turn?

Silver Saints can fix a stiff or hard-to-turn tap, which is usually a limescaled or worn cartridge or seized mechanism, by cleaning or replacing the cartridge so the tap operates smoothly again.

Can you replace a kitchen mixer tap in London?

Silver Saints replaces kitchen mixer and monobloc taps across London, fitting the new tap, connecting the flexi tails, fitting or checking the isolation valves and testing for leaks under pressure before leaving.

Which London areas do you cover for tap fitting and repairs?

Silver Saints fits and repairs taps across all 32 London boroughs and the City of London, from inner London out to boroughs such as Bromley, Croydon, Ealing and Richmond, plus the adjacent TW, KT, CR and BR postcodes.

Customer Reviews

Our customers across London rate us highly on the main review sites:

• Google Customer Reviews
• Trustpilot Customer Reviews
• Checkatrade Customer Reviews
• Yell Customer Reviews

Silver Saints tap fitting and repairs in London

Silver Saints tap fitting and repairs is a diagnose-and-fix or supply-and-fit visit for kitchen and bathroom taps in London homes, covering dripping, stiff, leaking and worn taps, replacing perished washers and re-cutting scored valve seats on traditional compression and pillar taps, replacing matched ceramic disc cartridges on mixer and monobloc taps, fitting customer-supplied replacement taps, and fitting or checking isolation valves and flexi tails, with the tap tested under pressure before the handyman leaves. It covers all 32 London boroughs and the City of London plus the TW, KT, CR and BR postcodes, across Victorian and Edwardian houses, mansion blocks and modern flats, is carried out Monday to Saturday 8am to 5pm, and is charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT thereafter with no call-out fee, fully insured and backed by a 12-month guarantee. To book, call 0207 0999 199 or visit bookings.silversaints.com.

Instant online Booking