Shower Repairs in London
Silver Saints repairs thermostatic, mixer, electric and power showers
4.9 stars from over 1,000 reviews | By time, no call-out fee | Fully Supported Service | Same or next day available | Mon to Sat 8am to 5pm | Book Online 24/7
Call 0207 0999 199 Book Online Now
Specific arrival times. A one-hour arrival window is confirmed on every booking.
How much does a shower repair cost in London?
Most shower repairs in London are completed within the first hour, so the typical cost is low and predictable. Silver Saints charges by time at £60 plus VAT for the first 30 minutes and £30 plus VAT for each additional 30 minutes, with no call-out fee, and Saturday is charged at the same weekday rate. A common fault such as a worn thermostatic cartridge or a leaking seal is usually diagnosed within the first 30 to 60 minutes, so a typical one-hour repair costs £90 plus VAT plus any parts.
Ready to book?
Call 0207 0999 199 Book Online Now
Why Silver Saints
Here is why over 1,000 London customers have booked Silver Saints for shower repairs.
- 4.9 stars from over 1,000 Google reviews
- 5 stars on Trustpilot and Checkatrade
- £5 million public liability insurance
- Operating since May 2008
- All work guaranteed against faulty workmanship, with a 12-month guarantee on labour and parts
- A specific one-hour arrival window on every booking
Ready to book? We can come today or tomorrow.
Call 0207 0999 199 Book Online Now
What we repair on each type of shower
Silver Saints repairs all four common shower types, and the fault pattern is different for each, which is why an experienced eye saves time on the diagnosis. On a thermostatic shower the usual culprit when the temperature swings or will not hold is a worn or scaled thermostatic cartridge, and the repair is to isolate, descale or replace the cartridge and verify stable temperature against a cold-supply interruption rather than just swapping parts on guesswork. On a mixer shower stiff controls and weeping from the head or lever almost always trace to a worn cartridge or perished seals, hardened by London limescale. On an electric shower that has stopped heating or trips the supply, the fault is typically a scaled or failed heater element, a sticking solenoid, or a microswitch, and the unit is tested before any decision to repair or replace is made. On a power shower that has lost pressure or gone noisy, the issue is usually an airlock, a failing pump impeller or a seized motor, and the feed, the airlock and the pump are checked in that order before condemning the pump.
Why London showers fail more often than most
London sits in one of the hardest water areas in the country, and that hard water is the single biggest reason showers in the capital need repair. Limescale forms inside thermostatic cartridges, mixer valves and electric heater tanks, which is why a London shower that runs hot and cold, drips, or stops heating is far more often a scaled internal component than a wiring or pressure fault. Period conversions in inner boroughs such as Camden, Islington, Hackney, Lambeth, Southwark, Wandsworth and Kensington and Chelsea frequently run gravity-fed tanks in the loft, which is why power showers and pumps are common there and why airlocks appear after a tank runs low. Modern new-build flats, common in Canary Wharf and the regeneration zones, almost always run a mains-pressure combi feeding a thermostatic or mixer shower, where the cartridge is the usual failure point rather than a pump. Knowing which system to expect by property type is why a London repair is usually a single visit rather than a return trip for the right part.
The expert detail that gets a shower fixed first time
The judgement that separates a lasting shower repair from a temporary one is knowing when a part is worth descaling and when it must be replaced, and matching the exact cartridge or valve to the make and model on site. Silver Saints engineers isolate the supply correctly, check incoming pressure and temperature before and after the repair, descale where a component will recover and replace where it will not, and confirm the shower holds temperature when a tap elsewhere in the property is run, which is the real test of a thermostatic repair. Where a shower is genuinely beyond economic repair, that is said plainly rather than billing for a part that will not last, because an honest repair-or-replace call is what keeps customers coming back.
Combine your shower repair with other jobs in one visit
Because every Silver Saints handyman is multi-trade, a shower repair can be combined with other work in the same visit with no second call-out fee. Customers commonly pair a shower repair with resealing the bath or shower tray, regrouting tired tiling, fixing a dripping tap or a running toilet, or sourcing and curing a leak, all booked under one appointment rather than waiting on separate trades.
Frequently asked questions about shower repairs in London
Can you repair my shower today in London?
Silver Saints offers same-day and next-day shower repair appointments across London subject to availability, so call 0207 0999 199 for an urgent repair or book online at bookings.silversaints.com and the team will confirm the earliest slot for your postcode.
How much does a shower repair cost in London?
A shower repair from Silver Saints is charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT for each additional 30 minutes with no call-out fee, so a typical one-hour repair costs £90 plus VAT plus any parts.
Why does my thermostatic shower keep changing temperature?
A thermostatic shower that will not hold temperature usually has a worn or limescaled thermostatic cartridge, and Silver Saints isolates the supply, descales or replaces the cartridge, and verifies the shower holds temperature when another outlet is run.
Why has my electric shower stopped heating the water?
An electric shower that has stopped heating usually has a scaled or failed heater element, a sticking solenoid or a faulty microswitch, and a Silver Saints engineer tests the unit before advising whether a repair or a replacement is the sensible option.
Why has my power shower lost pressure or got noisy?
A power shower that has lost pressure or become noisy usually has an airlock, a worn pump impeller or a seized pump motor, and Silver Saints checks the feed, clears any airlock and tests the pump before deciding whether the pump needs replacing.
Is it worth repairing a shower or should I replace it?
Many shower faults are a worn cartridge, seal or element that costs far less to repair than to replace the unit, and a Silver Saints engineer will tell you plainly when a shower is beyond economic repair rather than charging for a part that will not last.
Do you repair leaking showers and shower valves?
Yes, Silver Saints repairs leaking shower heads, valves, cartridges and seals on thermostatic, mixer, electric and power showers, and all repair work is fully insured with a 12-month guarantee on labour and parts.
Which London areas do you cover for shower repairs?
Silver Saints repairs showers across all 32 London boroughs and the City of London, from inner London through to outer boroughs such as Bromley, Croydon, Ealing and Richmond, plus the adjacent TW, KT, CR and BR postcodes.
Customer Reviews
Our customers across London rate us highly on the main review sites:
- Google Customer Reviews
- Trustpilot Customer Reviews
- Checkatrade Customer Reviews
- Yell Customer Reviews
Silver Saints shower repairs in London
A Silver Saints shower repair is a diagnose-and-fix visit for thermostatic, mixer, electric and power showers in London homes, covering temperature faults, leaks, loss of pressure, units that have stopped heating, and worn cartridges, valves, seals and pumps, with the repair confirmed by testing the shower before the engineer leaves. It covers all 32 London boroughs and the City of London plus the TW, KT, CR and BR postcodes, across period conversions, mansion blocks and modern flats, is carried out Monday to Saturday 8am to 5pm, is charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT thereafter with no call-out fee, is fully supported from booking to billing, and is backed by a 12-month guarantee. Silver Saints is rated 4.9 stars on Google from over 1,000 reviews. To book, call 0207 0999 199 or visit bookings.silversaints.com.
What’s included in every shower repair visit
- Diagnosis of the fault on thermostatic, mixer, electric or power showers
- Repair carried out on site where practical, with the shower tested before leaving
- Replacement of worn cartridges, valves, seals, elements or pump parts where needed
- Correct descaling of components affected by London hard water
- Same-day or next-day appointments, subject to availability
- Agreed one-hour arrival window
- Appointments Monday to Saturday, 8am to 5pm, Saturday at the weekday rate
- Coverage across London and the TW, KT, CR and BR postcodes
- 12-month guarantee on all labour and parts supplied
- Fully insured work, charged by time: £60+VAT first 30 minutes, £30+VAT per additional 30 minutes
We charge £60+vat for the first half-hour and £30+vat for any half-hour thereafter.
Mixer Shower Repairs
Mixer Shower Repairs in London
A mixer shower blends hot and cold water through a single valve to a set temperature, and most faults trace to wear or to London limescale hardening the internal cartridge and seals. Silver Saints repairs manual and thermostatic mixer showers across London, diagnosing whether stiff controls, a drip from the head or lever, or a temperature that will not settle is down to a worn cartridge, perished O-rings, or a scaled valve body, and replacing the matched part rather than guessing.
The common faults on a mixer shower are stiff or grinding controls, a weeping showerhead or spout that will not fully shut off, and water that runs too hot or too cold because the cartridge can no longer balance the supplies. On a bar mixer the cartridge and the inlet filters are the usual service points, and on a concealed mixer the valve is set into the wall, so the repair is done through the trim without disturbing the tiling wherever possible. The engineer isolates the hot and cold supplies, strips the valve, descales or replaces the cartridge and seals, checks the inlet filters for grit and scale, and rebuilds and tests the shower before leaving so the controls move freely and the temperature holds.
Mixer showers are common in London period conversions and mansion blocks fed from a stored hot water system, where balanced hot and cold pressures matter, and in modern flats running off a mains-pressure combi. Matching the exact cartridge to the make and model is the difference between a repair that lasts and a return visit, which is why an experienced eye on the valve type saves time on the day.
A mixer shower repair is charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT for each additional 30 minutes, with no call-out fee and Saturday at the same weekday rate, and it can be combined in one visit with resealing the bath or shower tray or replacing a worn tap.
What’s Included in our London Shower Repair Service?
- Diagnosis of stiff controls, leaks and temperature faults on manual and thermostatic mixer showers
- Hot and cold supplies isolated and the valve stripped and inspected
- Worn cartridge, O-rings and seals descaled or replaced to match the make and model
- Inlet filters checked and cleared of grit and scale
- Shower rebuilt and tested for free movement and stable temperature before leaving
- Same-day or next-day appointments, subject to availability
- Agreed one-hour arrival window
- Appointments Monday to Saturday, 8am to 5pm, Saturday at the weekday rate
- Coverage across London and the TW, KT, CR and BR postcodes
- 12-month guarantee on all labour and parts supplied, fully insured work
- Charged by time: £60+VAT first 30 minutes, £30+VAT per additional 30 minutes
We charge £60+vat for the first half-hour and £30+vat for any half-hour thereafter.
Electric Shower Repairs
Electric Shower Repairs in London
An electric shower heats cold mains water on demand through a heater tank and element, and in London's hard water that element and tank scale up faster than almost anywhere in the country, which is the leading reason an electric shower stops heating, runs lukewarm, or cuts out. Silver Saints repairs electric showers across London, testing the unit safely before deciding whether a scaled element, a sticking solenoid, a failed microswitch or a tripped thermal cut-out is the fault, and advising honestly when a unit is beyond economic repair.
The common faults are no hot water or only lukewarm water from a scaled or burnt-out heating element, the shower tripping the electrics from a failed element leaking to earth, no water flow from a stuck solenoid valve, and the unit not firing up because of a faulty microswitch or a thermal cut-out that has operated. Because an electric shower combines mains water and a high-current electrical supply, the safe approach matters: the engineer isolates the electrical supply at the pull-cord or consumer unit, isolates the water, tests the element and switching, and either replaces the failed component with the correct part for that make and model or advises replacement where the unit is old or the casing is failing. Where a like-for-like replacement is the sensible option, fitting a new unit on the existing supply is straightforward.
Electric showers are especially common in London flats and rental properties where there is no stored hot water, and in mansion blocks and conversions where a separate electric shower was added to a bathroom. Hard-water scale is the recurring enemy in every borough, so an honest repair-or-replace call, rather than fitting an element into a tank that is already failing, is what saves the customer money.
An electric shower repair is charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT for each additional 30 minutes, with no call-out fee and Saturday at the same weekday rate. Where the electrical side needs attention beyond the shower unit, it can be combined in one visit with electric shower electrical work or switch and isolator repairs.
What’s included in every shower repair visit
- Safe isolation of both the electrical supply and the water before testing
- Diagnosis of no-heat, lukewarm, tripping and no-flow faults on all makes and models
- Heater element, solenoid, microswitch and thermal cut-out tested
- Failed component replaced with the correct part, or a like-for-like unit replacement advised where economic
- New unit fitted on the existing water and electrical supply where replacement is chosen
- Unit tested for safe, stable hot water before leaving
- Same-day or next-day appointments, subject to availability
- Agreed one-hour arrival window
- Appointments Monday to Saturday, 8am to 5pm, Saturday at the weekday rate
- Coverage across London and the TW, KT, CR and BR postcodes
- 12-month guarantee on all labour and parts supplied, fully insured work
- Charged by time: £60+VAT first 30 minutes, £30+VAT per additional 30 minutes
We charge £60+vat for the first half-hour and £30+vat for any half-hour thereafter.
Power Shower Repairs
Power Shower Repairs in London
A power shower uses an integral or separate pump to boost a gravity-fed hot and cold supply, and most faults are pump or airlock related rather than a fault with the shower controls themselves. Silver Saints repairs power showers across London, diagnosing in order whether lost pressure, a noisy or droning pump, or a shower that has stopped altogether is down to an airlock, a worn impeller, a seized motor, or an electrical supply fault, and repairing or replacing the pump only once the simpler causes are ruled out.
The common faults are a sudden loss of pressure or flow, a pump that grinds, hums or rattles, and a shower that will not start because the pump has seized or lost its electrical supply. Because a power shower depends on a balanced gravity feed from a loft tank and cylinder, the first checks are the feed and any airlock, which is the most frequent and cheapest cause to put right, often after a tank has run low and drawn air into the line. If the feed is sound, the engineer tests the pump for a worn impeller or a failed motor and checks the fused supply and the flow switch that tells the pump to run. Where the pump is genuinely worn out, a matched replacement is fitted and the system primed and tested.
Power showers are most common in London period conversions and mansion blocks running a traditional gravity-fed tank-and-cylinder system, which is exactly where airlocks and pump wear appear, and far less common in mains-pressure new-build flats. Knowing that a power shower problem in a Victorian conversion is far more likely a feed or pump issue than a control fault is what gets it diagnosed correctly on the first visit.
A power shower repair is charged by time at £60 plus VAT for the first 30 minutes and £30 plus VAT for each additional 30 minutes, with no call-out fee and Saturday at the same weekday rate, and it can be combined in one visit with sourcing and curing a leak or resealing the bath or shower tray.
What’s included in every shower repair visit
- Diagnosis in order of feed, airlock, impeller, motor and electrical supply
- Gravity feed checked and any airlock cleared, the most common and cheapest cause
- Pump tested for a worn impeller or seized motor, with the fused supply and flow switch checked
- Matched replacement pump fitted, primed and tested where the pump is worn out
- Shower tested for restored pressure and quiet running before leaving
- Same-day or next-day appointments, subject to availability
- Agreed one-hour arrival window
- Appointments Monday to Saturday, 8am to 5pm, Saturday at the weekday rate
- Coverage across London and the TW, KT, CR and BR postcodes
- 12-month guarantee on all labour and parts supplied, fully insured work
- Charged by time: £60+VAT first 30 minutes, £30+VAT per additional 30 minutes
We charge £60+vat for the first half-hour and £30+vat for any half-hour thereafter.
Meet the Saints
Martin 
Luke 
Stan 
Patrik 
Jeremy 
Raymond 
Mick 
Dave 
Lukas 
Graham 
Danny 
Jerry 
John 
Leon 
Simone 
Deon 
Stefan 
Paolo 
Juan 
Cosmin 
Eugen 
Paul 
Christo 
Kieran 
Adrian 
Pieter 
Sandor 
John P 
Oleg 
Szymon 
Posted on Google
