Bath screen installation in London
Silver Saints fit over-bath screens, fixed glass panels and folding bath screens across London. We take the old screen away, fit the new one and seal it, usually in one visit.
Plus parts. Saturdays are same as the weekday rate. Estimate before we start.
What we fix
We fit new bath screens and replace old ones. Most jobs are a single visit, including removing the screen you are replacing from the wall for others to take away.
Over-bath screen fitting
A straight panel fixed into the wall profile and sealed along the bath edge.
Fixed glass panel fitting
A walk-in panel levelled and fixed into tile or masonry so it stays rigid.
Hinged and folding screens
Two or three panels on hinges, set square so they fold and close cleanly.
Replacing a leaking screen
Perished seals or a failed wall profile letting water past onto the floor.
Removing the old screen
Old panel and profile cut out, fixing holes filled, and the screen taken away.
Sealing against leaks
Old silicone cut back, the surface dried, then a fresh bead run along the joint.
A dropped or misaligned screen
Worn hinges or loose wall fixings that stop the panel sitting square.
Fitting to tiled or panelled walls
Tile drilled without cracking it, or panelled walls fixed into the batten behind.
Screen for a new bath or tray
A screen fitted after a bath, tray or wall panel change, then sealed to suit.
We work on over-bath screens, walk-in and fixed panels, and hinged and bi-fold screens. That means wall profiles, brackets and seals on tiled walls and wall panels, against acrylic and steel baths and shower trays. We can supply and fit, or fit a screen you have already bought.
Different job? See shower repairs if the shower itself is not running properly, resealing baths and shower trays for silicone work on its own, and tiling and decorating for tile repairs around the screen.
What it costs
Labour only, charged by time. Parts are on top and you get an estimate before we start. The times below are typical, not fixed prices.
Where we cover
We cover all London boroughs plus the TW, KT, CR and BR postcode areas. London bathrooms run from Victorian tiled walls to new-build panelling, so we carry fixings for both. Engineers cross central London by motorcycle and scooter, which means faster arrival and easier parking.
Landlords and letting agents
We arrange access directly with your tenant or collect keys from your agent, so you do not need to attend. This job can be booked alongside other work in one visit.
Account invoicing and pre-approved spend limits are set out on our landlord products page.
How we fit it
First we check the opening, the bath edge and the wall type, so we use the right fixings.
Then we fit the wall profile and set the panel square and level, tight to the bath or tray.
Last we seal the joint and test it with water before we clear up and leave.
Why Silver Saints
Bath screen installation FAQs
Can you fit a shower screen today?
Often yes. Silver Saints usually has same or next day slots for bath screen installation in London, and every booking carries a one-hour arrival window.
How much does a bath screen installation cost in London?
A straight over-bath screen is usually £60 to £120 plus VAT in labour, plus parts. Silver Saints charges £60 plus VAT for the first half-hour.
Do you take away my old bath screen?
No. Silver Saints removes the old bath or shower screen, fills the redundant fixings and leaves the panel for you to dispose of or for a 3rd party to remove.
Can you fit a folding bath screen to a tiled wall?
Yes. We drill tile without cracking it and set the hinges square, so bath screen fitting in London closes cleanly and seals along the bath.
Do you cover my part of London?
Silver Saints covers all London boroughs plus the TW, KT, CR and BR postcodes. Central London engineers travel by motorcycle and scooter for faster arrival.
Is the work guaranteed?
Yes. Silver Saints gives a 12-month guarantee on labour and on parts we supply for shower screen installation in London, against faulty workmanship or failed parts.
In summary
Silver Saints fit and replace bath and shower screens across London. We fit over-bath screens, fixed glass panels, and hinged or folding screens. We take the old screen away, then seal and test the new one. Labour is £60 plus VAT for the first half-hour, then £30 plus VAT per half-hour, plus parts. Saturday is charged at the weekday rate and there is no call-out fee. Labour and parts we supply carry a 12-month guarantee. Call 0207 0999 199 or book at https://bookings.silversaints.com.
Screen leaking, missing or hanging off?
Book online or call, and we'll sort it quickly with the Silver Service you deserve. Monday to Saturday, 8am to 5pm.
Bath Screen Fitting Service includes:
- Inspection of the wall surface and fixing locations before drilling
- Correct fixings supplied: diamond-tipped bits for tiles, masonry anchors for concrete block, toggle bolts for plasterboard on stud
- Screen brackets fitted level and plumb
- Bath-grade silicone sealant applied and tooled at all wall joints and the base
- Old screen removed and wall cleaned if replacing an existing fitting
- Screen tested for opening, closing and sealing before the handyman leaves
- Clear estimate given on site before work starts
We charge £60+vat for the first half-hour and £30+vat for any half-hour thereafter.
Shower enclosure installation in London
Silver Saints fit framed, frameless, corner and walk-in shower enclosures across London, usually the same or next day. You supply the enclosure and its fittings. We bring the tools, fixings and the installation.
Plus parts. No call-out fee. Saturday at the weekday rate. Estimate before we start.
What we fit
We install new enclosures and replace old ones. Most fit in one visit. We set the frame, doors and seals so the enclosure runs smoothly and stays watertight.
Framed enclosures
A framed unit fixed square to the wall, with the doors set to run and close cleanly.
Frameless and semi-frameless
Glass panels levelled and fixed precisely so they sit rigid without a full frame.
Corner, alcove and quadrant
Two sides aligned square to each other so the doors meet and seal.
Walk-in glass panels
A fixed panel braced and secured into tile or masonry so it stays firm.
Sliding and hinged doors
Doors hung and adjusted for a smooth run and a clean close.
Replacing an old enclosure
The old unit removed and a new one fitted the same visit, making good where practical.
Sealing against leaks
A neat silicone bead run around the enclosure to keep the perimeter watertight.
Tiled or panelled walls
Tile drilled without cracking it, or panels fixed into the batten behind.
We fix securely to tiled, plasterboard, brick and stud walls, using the correct anchors and supports for each surface. When we replace an old enclosure we remove it and make good where practical, though we do not take the old enclosure away.
Fitting a screen over a bath rather than a full enclosure? See bath and shower screen installation. Different job again? See shower repairs if the shower itself is not running properly, resealing baths and shower trays for silicone work on its own, and tiling and decorating for tile repairs around the enclosure.
What it costs
Labour only, charged by time. Parts are on top and you get an estimate before we start. The times below are typical, not fixed prices.
Where we cover
We cover all London boroughs plus the TW, KT, CR and BR postcode areas. London bathrooms run from Victorian tiled walls to new-build panelling, so we carry fixings for both. Engineers cross central London by motorcycle and scooter, which means faster arrival and easier parking.
How we fit an enclosure
First we check the tray or floor, the opening and the wall type, so we use the right fixings.
Then we set the frame or panels square and level, and hang the doors so they run and close cleanly.
Last we seal the enclosure and test it with water before we clear up and leave.
What you supply
Enclosures are fit only. You provide the enclosure, the frame and the manufacturer fittings.
We bring the tools, fixings, sealant and the installation. When we replace an old enclosure we make good where practical, but we do not take the old unit away.
Landlords and agents: we arrange access with your tenant or collect keys from your agent, so you do not need to attend. Account invoicing is set out on our landlord services page.
Why Silver Saints
Shower enclosure installation FAQs
Can you fit a shower enclosure today?
Often yes. Silver Saints usually has same or next day slots for shower enclosure installation in London, and every booking carries a one-hour arrival window.
How much does shower enclosure installation cost in London?
Labour is charged by time from £60 plus VAT for the first half-hour, then £30 plus VAT per half-hour, plus parts. Most enclosures are 60 to 150 minutes.
How long does it take to fit a shower enclosure?
Most shower enclosures take 60 to 120 minutes to install in a London home, depending on the design, panel size, fixing needs and the condition of the walls.
Do you fit framed and frameless enclosures?
Yes. Silver Saints fits framed, semi-frameless and frameless enclosures, along with corner, alcove, quadrant and walk-in glass panels, across London.
Do you fit enclosures on tiled walls?
Yes. Silver Saints fixes enclosures securely to tiled, plasterboard, brick and stud walls in London, using the correct anchors and supports for each surface.
Do I need to supply the shower enclosure?
Yes. You provide the enclosure, frame and manufacturer fittings, and Silver Saints brings the tools, fixings and the installation to fit it correctly in your London home.
Can you replace an existing shower enclosure?
Yes. Silver Saints removes an old enclosure and fits a replacement in the same visit, making good where practical, though we do not take the old enclosure away.
Do you fit enclosures in rental or managed properties?
Yes. Silver Saints regularly fits enclosures in managed and rented homes across London, working carefully to avoid tile damage and arranging access with the tenant or agent.
In summary
Silver Saints fit shower enclosures across London. We install framed, semi-frameless and frameless units, corner, alcove, quadrant and walk-in enclosures, and sliding or hinged doors. You supply the enclosure and its fittings. We set it square, hang the doors and seal it. Labour is £60 plus VAT for the first half-hour, then £30 plus VAT per half-hour, plus parts. Saturday is the weekday rate and there is no call-out fee. Labour carries a 12-month guarantee. Call 0207 0999 199 or book at https://bookings.silversaints.com.
New enclosure waiting to go in?
Book online or call, and we'll sort it quickly with the Silver Service you deserve. Monday to Saturday, 8am to 5pm.
Our Shower Enclosure Installation includes:
- Swift Arrival: Our motorcycle-mounted team reaches you quickly
- Expert Assessment: We provide an accurate time and cost estimate on-site
- Efficient Installation: Most enclosures fitted in under two hours
- Quality Assurance: All work backed by our satisfaction guarantee
We charge £60+vat for the first half-hour and £30+vat for any half-hour thereafter.
Posted on Google